3RK1200-0CE00-0AA2 AS-INTERFACE MODULE SLIMLINE
From SIEMENS
| AS-i SlimLine module Phased-out product !!! For further information, please contact our sales department S22.5 digital 4 DI, IP20 4 x input for 2-wire sensor Screw terminals Overall width 22.5 mm | |||
| General technical data: | |||
| Design of the product | SlimLine S22.5 - I/O modules for operation in the control cabinet, IP20 | ||
| Design of the slave type | standard slave | ||
| Type | 4 inputs | ||
| I/O configuration | 0 | ||
| ID/ID2 code | 0/F | ||
| Protocol is supported AS-interface protocol | Yes | ||
| AS interface total current input max | mA | 50 | |
| operating voltage according to AS-Interface spezification | V | 26.5 ... 31.6 | |
| Addressing | front addressing socket | ||
| Type of electrical connection of the inputs and outputs | screw-type terminals | ||
| Reference code acc. to DIN 40719 extended according to IEC 204-2 acc. to IEC 750 | A | ||
| Reference code acc. to DIN EN 61346-2 | K | ||
| note | An external additional supply (AUX POWER) of 20 to 30 V DC is required for the supply of the output circuits.The additional supply must comply with VDE 0106 (PELV), protection class III. | ||
| Sensor supply: | |||
| Type of voltage supply for power supply | using AS-Interface | ||
| Input voltage | V | 20 ... 30 | |
| Property of the sensor supply Short-circuit and overload resistant | Yes | ||
| Inputs: | |||
| Number of digital inputs | 4 | ||
| Type of connection | 2-wire technology | ||
| Input circuit | PNP transistor | ||
| Type of voltage of the input voltages | DC | ||
| Inputs switching level High min | V | 10 | |
| Input current at digital input | |||
| for signal <1> minimum | mA | 5 | |
| with signal <0> maximum | mA | 1.5 | |
| Inputs sensor supply using AS-Interface | short-circuit and overload resistant | ||
| Outputs: | |||
| Number of digital outputs | 0 | ||
| Output voltage at DC at 24 V | V | 22 ... 24 | |
| Status display | |||
| display of I/Os | yellow LED | ||
| AS-Interface | green LED | ||
| FAULT | red LED | ||
| Assignment of data bits | |||
| D0 | IN1 | ||
| D1 | IN2 | ||
| D2 | IN3 | ||
| D3 | IN4 | ||
| Ambient conditions: | |||
| Ambient temperature | |||
| during operation | °C | -25 ... +70 | |
| during storage | °C | -40 ... +85 | |
| Protection class IP | IP20 | ||
| Mechanical data: | |||
| Width | mm | 22.5 | |
| Height | mm | 102 | |
| Depth | mm | 86 | |
| Mounting type | 35 mm standard rail mounting or wall mounting using push-in lugs | ||
| Conductor cross-section | |||
| solid | 1 x (0.5 - 4) mm² or 2 x (0.5 - 2.5) mm² | ||
| finely stranded | |||
| — with end sleeve | 1 x (0.5 - 2.5) mm² or 2 x (0.5 - 1.5) mm² | ||
| AWG solid or stranded | AWG 2 x (20 - 14) mm² | ||
