3RK1200-0CQ01-0AA3 AS-INTERFACE ACTUATOR SENSOR
From SIEMENS
| AS-Interface user module IP67 Phased-out product !!! For further information, please contact our sales department digital, 4 DI, NPN 4x 1 input maximum 200 mA 4 x M12 socket | |||
| General technical data: | |||
| Design of the product | digital I/O modules for operation in the field, IP67 - user modules | ||
| Design of the slave type | standard slave | ||
| Type | 4 inputs | ||
| I/O configuration | 0 | ||
| ID code | 1 | ||
| Number I/O sockets | 4 | ||
| Protocol is supported AS-interface protocol | Yes | ||
| Type of electrical connection of the inputs and outputs | M12 screw-type terminals | ||
| AS interface total current input max | mA | 290 | |
| operating voltage according to AS-Interface spezification | V | 26.5 ... 31.6 | |
| Reference code acc. to DIN 40719 extended according to IEC 204-2 acc. to IEC 750 | A | ||
| Reference code acc. to DIN EN 61346-2 | K | ||
| Inputs: | |||
| Number of digital inputs | 4 | ||
| Input circuit | NPN | ||
| Type of voltage of the input voltages | DC | ||
| Input voltage | V | 20 ... 27 | |
| Inputs switching level High min | V | 10 | |
| Input current at digital input | |||
| for signal <1> minimum | mA | 5 | |
| with signal <0> maximum | mA | 1.5 | |
| Inputs sensor supply using AS-Interface | short-circuit and overload resistant | ||
| Design of the pin assignment of the inputs | Y-II assignement | ||
| Outputs: | |||
| Number of digital outputs | 0 | ||
| Output voltage at DC at 24 V | V | 22 ... 24 | |
| Design of the pin assignment of the outputs | Y-II assignement | ||
| Property of the output Short-circuit proof | No | ||
| Status display | |||
| display of I/Os | yellow LED | ||
| display of AS-Interface/diagnostics | LED 'AS-i' green = OK red = No data traffic flashes red/yellow = zero address flashes red = overload sensor | ||
| Assignment of data bits | |||
| socket | PIN4 = IN1 (D0), PIN2 = IN2 (D1) | ||
| socket 2 | PIN4 = IN2 (D1) | ||
| socket 3 | PIN4 = IN3 (D2), PIN2 = IN4 (D3) | ||
| socket 4 | PIN4 = IN4 (D3) | ||
| Ambient conditions: | |||
| Ambient temperature | |||
| during storage | °C | -40 ... +85 | |
| during operation | °C | -25 ... +85 | |
| Protection class IP | IP67 | ||
| Mechanical data: | |||
| Width | mm | 45 | |
| Height | mm | 80 | |
| Depth | mm | 27 | |
| Mounting type | standard rail mounting/wall mounting using coupling module | ||
| connection | using contact pins on FK or Pg coupling module | ||
| Type of connection | 2- and 3-wire technology | ||
