3RK1300-0AS10-1AA1 EM 300 ERS, FOR ET 200 X,
From SIEMENS
| EM 300 ERS, FOR ET 200 X, ELECTRONIC REVERSING STARTER, SETTING RANGE 0.6...2.18A, AC-3, 0.18...0.75KW/400V, WITH BRAKE CONTACT, DC 24V/3A, W. 9-POLE POWER CONNECTION, MIN. DISCONNECTION TIME 1S | |||
| General technical data: | |||
| Design of the product | reversing starter | ||
| Product function Bus communication | Yes | ||
| Protocol is supported | |||
| AS-interface protocol | No | ||
| PROFIBUS DP protocol | Yes | ||
| Product component Motor brake output | Yes | ||
| Equipment marking acc. to DIN EN 61346-2 | Q | ||
| Equipment marking acc. to DIN 40719 extended according to IEC 204-2 acc. to IEC 750 | A | ||
| Depth | mm | 134 | |
| Height | mm | 270 | |
| Width | mm | 140 | |
| Control circuit/ Control: | |||
| Type of voltage | DC | ||
| Control supply voltage | |||
| at DC rated value | |||
| — minimum | V | 20.4 | |
| — maximum | V | 28.8 | |
| Main circuit: | |||
| Design of short-circuit protection | fuse | ||
| Type of the motor protection | solid-state | ||
| Design of the switching contact | solid-state | ||
| Operating voltage rated value | V | 400 ... 500 | |
| Operating power | |||
| at AC-3 at 400 V rated value | kW | 0.8 | |
| for three-phase motors at 400 V at 50 Hz | |||
| — minimum | kW | 0.18 | |
| — maximum | kW | 0.8 | |
| Adjustable pick-up value current of the current-dependent overload release | |||
| initial value | A | 0.6 | |
| Full-scale value | A | 2.18 | |
| Maximum short-circuit current breaking capacity (Icu) at 400 V rated value | A | 100 | |
| Connections/ Terminals: | |||
| Type of electrical connection for main current circuit | tab terminals | ||
| Ambient conditions: | |||
| Protection class IP | IP65 | ||
| Ambient temperature during operation | °C | 0 ... 55 | |
