3RK1300-0BS10-1AA1 EM 300 ERS, FOR ET 200 X,
From SIEMENS
EM 300 ERS, FOR ET 200 X, ELECTRONIC REVERSING STARTER, SETTING RANGE 2.0...5.95A AC-3, 1.1...2.2KW/400V, WITH BRAKE CONTACT, DC 24V/3A W. 9-POLE POWER CONNECTION, MIN. DISCONNECTION TIME 1S | |||
General technical data: | |||
Design of the product | reversing starter | ||
Product function Bus communication | Yes | ||
Protocol is supported | |||
AS-interface protocol | No | ||
PROFIBUS DP protocol | Yes | ||
Product component Motor brake output | Yes | ||
Equipment marking acc. to DIN EN 61346-2 | Q | ||
Equipment marking acc. to DIN 40719 extended according to IEC 204-2 acc. to IEC 750 | A | ||
Depth | mm | 134 | |
Height | mm | 270 | |
Width | mm | 140 | |
Control circuit/ Control: | |||
Type of voltage | DC | ||
Control supply voltage | |||
at DC rated value | |||
— minimum | V | 20.4 | |
— maximum | V | 28.8 | |
Main circuit: | |||
Design of short-circuit protection | fuse | ||
Type of the motor protection | solid-state | ||
Design of the switching contact | solid-state | ||
Operating voltage rated value | V | 400 ... 500 | |
Operating power | |||
at AC-3 at 400 V rated value | kW | 2.2 | |
for three-phase motors at 400 V at 50 Hz | |||
— minimum | kW | 0.75 | |
— maximum | kW | 2.2 | |
Adjustable pick-up value current of the current-dependent overload release | |||
initial value | A | 2 | |
Full-scale value | A | 5.95 | |
Maximum short-circuit current breaking capacity (Icu) at 400 V rated value | A | 100 | |
Connections/ Terminals: | |||
Type of electrical connection for main current circuit | tab terminals | ||
Ambient conditions: | |||
Protection class IP | IP65 | ||
Ambient temperature during operation | °C | 0 ... 55 |