3SU1801-0AE00-2AB1
ENCLOSURE PLASTIC, 1 COMMAND POINT

From SIEMENS

Enclosure for command devices, 22 mm, round, Enclosure material plastic, enclosure top part gray, 1 control point plastic, Recess for label, A=Pushbutton black label: O 1 NC, screw terminal, floor mounting, Label enclosed
Product brand nameSIRIUS ACT
Product designationEnclosures
Product type designation3SU1
Manufacturer's article number
of supplied contact moduleA1 = 3SU1400-2AA10-1CA0
of supplied contact module at the command point A 1
of the supplied holderA = 3SU1500-0AA10-0AA0
of the supplied holder at the command point A
of the supplied actuator
of the supplied actuator at the command point A
of supplied empty enclosure
of supplied accessoryA = 3SU1900-0AF16-0QA0
of the supplied accessories at the command point A
Enclosure
Design of the housingwith recess for label
Shape of the enclosure frontSquare
Material of the enclosureplastic
Number of command points1
Product component
EMERGENCY STOP deviceNo
protective collarNo
Color
of top part of the enclosuregrey
Delivery state
as a kitNo
pre-wired on strip terminalNo
Mounting type of the enclosureVertical
Actuator
Design of the operating mechanismPushbutton
Suitability for use EMERGENCY OFF switchNo
Product feature
lockoutNo
Product extension optional Light sourceNo
Color
of the actuating elementblack
Material of the actuating elementplastic
Shape of the actuating elementround
Number of contact modules1
Front ring
Product component front ringYes
Design of the front ringStandard
Material of the front ringplastic
Color of the front ringblack
Holder
Material of the holderPlastic
Display
Number of LED modules0
General technical data
Product function
positive openingYes
EMERGENCY OFF functionNo
EMERGENCY STOP functionNo
Protection class IPIP66, IP67, IP69(IP69K)
Degree of protection NEMA ratingNEMA 1, 2, 3, 3R, 4, 4X, 12K, 13
Shock resistance
acc. to IEC 60068-2-27Sinusoidal half-wave 50 g / 11 ms
for railway applications acc. to DIN EN 61373Category 1, Class B
Reference code acc. to DIN EN 81346-2S
Reference code acc. to DIN EN 61346-2S
Continuous current of the C characteristic MCB10 A; for a short-circuit current smaller than 400 A
Continuous current of the quick DIAZED fuse link10 A
Continuous current of the DIAZED fuse link gG10 A
Operating voltage
at AC
— at 50 Hz rated value5 ... 500 V
— at 60 Hz rated value5 ... 500 V
at DC
— rated value5 ... 500 V
Auxiliary circuit
Design of the contact of auxiliary contactsSilver alloy
Number of NC contacts for auxiliary contacts1
Number of NO contacts for auxiliary contacts0
Number of CO contacts
for auxiliary contacts0
Connections/Terminals
Type of electrical connection
of modules and accessoriesScrew-type terminal
Type of electrical connection on enclosureCable routing above and below, both 1 x M20
Tightening torque of the screws in the bracket1 ... 1.2 N·m
Tightening torque of mounting screws in the enclosure cover1.5 ... 1.7 N·m
Tightening torque
with screw-type terminals0.8 ... 0.9 N·m
Interfaces
Design of the interface
for communicationwithout
Ambient conditions
Ambient temperature
during operation-25 ... +70 °C
during storage-40 ... +80 °C
Environmental category during operation acc. to IEC 607213M6, 3S2, 3B2, 3C3, 3K6 (with relative air humidity of 10 ... 95 %, no condensation in operation permitted for all devices behind front panel)
Installation/ mounting/ dimensions
Mounting type
of modules and accessoriesFloor mounting
Height85 mm
Width85 mm
Depth75 mm
Shape of the installation openinground
Accessories
Number of labels1
Marking of the name plate for command devicesA = O
Color of the labelA = black

External links