| Text of invitation to tender | | as passive infrared detector for ceiling mounting indoors, with monitoring motion range horizontal 360°, vertical approx. 105°, with optional blinding of parts of the detection area, for monitoring motion within an area with a diameter of approx. 8 m (depending on mounting/room height), with mixed light measurement, with cyclical sending or sending on change of value of the measured brightness value (Lux), with switching two-position brightness control, with dimming constant light level control for a main group of luminaries and up to four additional groups of luminaries, with lighting control configurable as fully automatic or semi-automatic, with motion detection for three function blocks (presence detector, motion detector, and HVAC detector), with two per function block selectable functions (A, B) on start of the presence detection and two per function block selectable functions (C, D) on expiration of the presence detection, with a configurable delay of 0…255 seconds between sending of function A and B respectively C and D, with selection per function (A, B, C, D) switching On/Off, 8-bit value, selectable 8-bit value, 16-bit value, temperature value, brightness value, 8-bit scene control, with blocking object per function block, with per function block configurable overshoot time, in each case configurable as a fixed time, as switchable between two times via the bus, or settable to a value via the bus, with parallel operation of several presence detectors (master-slave, master-master) without additional logic module, with integrated IR receiver and IR decoder for IR remote controls with six pairs of pushbuttons, with functions of the IR remote control selectable per pair of pushbuttons or per each single pushbutton of a button pair, with per pushbutton selectable function toggle, switching on, switching off, 8-bit scene recall, 8-bit value, 16-bit value, temperature value, brightness value, with for each pair of pushbuttons selectable function switching On/Off, 2-button dimming with stop telegram, 2-button solar protection control, variable 8-bit value, 8-bit scene control, with blocking object for IR decoder, with programming button reachable from front, with test mode for easy start-up, with LED for display of detected movements in test mode, to be configured using the ETS, with power supply over the bus line, with integrated bus coupling unit, with bus connection via bus terminal, for ceiling mounting on a flush-mounting box with 60 mm diameter and min. 40 mm depth or in a special housing for surface-mounting (to be ordered separately) |
