| SIMATIC S7-300, FUNCTION MODULE FM 353, FOR POSITIONING WITH STEPPER MOTOR, MODULE EXCHANGE W/O PG, PREQUISITE STEP7 V3.1 INCL. CONFIG. PACKAGE ON CD |
Supply voltage |
Rated value (DC) | |
24 V DC | Yes |
permissible range, lower limit (DC) | 20.4 V |
permissible range, upper limit (DC) | 28.8 V |
Input current |
Current consumption, max. | 300 mA |
Power loss |
Power loss, typ. | 7 W |
Digital inputs |
Number of digital inputs | 4; + 1 input for message signal |
Functions | Reference cams, flying actual value setting, flying measurement, start/stop positioning, external block change |
Input voltage |
Rated value (DC) | 24 V |
for signal "0" | -3 to +5V |
for signal "1" | +11 to +30V |
Input current |
for signal "0", max. (permissible quiescent current) | 2 mA |
for signal "1", typ. | 6 mA; 6 to 15 mA |
Digital outputs |
Number of digital outputs | 4 |
Functions | Position reached: stop, axis travels forward, axis travels back, change M-function M97, change M-function M98, start enable, direct output via data record |
Short-circuit protection | Yes |
Output voltage |
Rated value (DC) | 24 V |
for signal "1", min. | UP -3 V |
Output current |
for signal "1" permissible range for 0 to 55 °C, max. | 0.6 A; with UPmax |
for signal "0" residual current, max. | 2 mA |
Drive interface |
Signal Input |
Function | "Power section ready" |
Stepper drive |
Differential output voltage, min. | 2 V; RL = 100 Ohm |
Differential output voltage for signal "0", max. | 1 V; Io = 20 mA |
Differential output voltage for signal "1", min. | 3.7 V; Io = -20 mA |
Cable length, shielded, max. | 35 m |
Potential separation |
Potential separation digital inputs |
Potential separation digital inputs | No |
Potential separation digital outputs |
Potential separation digital outputs | No |
Degree and class of protection |
Degree of protection acc. to EN 60529 | |
IP20 | Yes |
Ambient conditions |
Ambient temperature during operation |
min. | 0 °C |
max. | 55 °C |
Ambient temperature during storage/transportation |
min. | -40 °C |
max. | 70 °C |
Connection method |
required front connector | 1x 20-pin |
Dimensions |
Width | 80 mm |
Height | 125 mm |
Depth | 118 mm |
Weights |
Weight, approx. | 500 g |
last modified: | 03/13/2019 |