6ES7924-2CC20-0AC0
50IDC TERM. BL. TPA PUSH-IN TERM.S7-1500

From SIEMENS

50IDC TERM. BL. TPA PUSH-IN TERM.S7-1500
Connection module TPA 3-tier for analog Modules of the SIMATIC S7-1500 Type: Push-in terminal without LED, VPE=1 unit 50 pole IDC connector for cable
Target systemSIMATIC S7-1500
Suitability for useAnalog I/O modules
Product type designationFully modular connection
Product designationConnection module
Operating data
Operating voltage
at DC / Rated value24 V
rated value50 V
at DC / maximum50 V
Current / rated value1 A
Continuous current / at DC / per signal cable / maximum1 A
Operating temperature0 ... 60 °C
Ambient temperature
during operation0 ... 60 °C
during storage-40 ... +70 °C
Number of terminal levels1
Number of terminal points / per terminal level1
Number of terminals72; Intended for analog
Type of connecting terminalPush-In
Type of electrical connection / for actuators and sensorsPush-In
Position / of the terminalTop
Design of LED initiator/actuator terminalPush-In
Width of screwdriver blade3.5 mm
Design of terminal / Terminal levels internally linkedNo
Product component
PE connectionNo
Shield connectionNo
DisconnectorNo
required / connection plateNo
Product feature / Infeed functionYes
Product feature / cross-connectableNo
Number of cables / per connection2; Connection for internal system: Combination of 1 or 2 Wires until the sum total of cross sections be achieved in a ferrule.
Type of connectable conductor cross-sections / solidNo
Connectable conductor cross-section
for flexible conductor / with core end processing0.2 ... 2.5 mm²; End sleeve according to DIN 46228/1 or DIN 46228/4 with plastic collar
stranded0.2 ... 2.5 mm²
finely stranded / without core end processing0.2 ... 2.5 mm²
finely stranded / with core end processing0.2 ... 2.5 mm²
Number of poles / at the 1st interface50; the IDC connector for the connection cable
Type of electrical connection / for connecting cablePlug-in connection
number of the plug contacts / of the electrical connection1
Wire length / maximum30 m; between front connector module and Connection module
General data
Mounting typeDIN rail 35 mm, DIN rail 15 mm
Installation or assembly noteany
Mounting positionany
Degree of pollution2
Overvoltage category2
Combustibility class acc. to UL 94V1
Insulation materialother
Design tested acc. to type of protection / EEx eNo
Certificate of suitability / cULus approvalYes
Equipment marking / acc. to DIN EN 81346-2X
Color
of the enclosuregrey
of the light sourcewithout
Length76 mm
Height / of the enclosure76 mm
Width / of the enclosure130 mm
Depth / of the enclosure60 mm
Height / with lowest-profile installation60 mm
Net weight0.27 kg

External links