ZNX:EIP-200S ETHERNET/IP HEAD ASSEMBLY FOR ET200S
From SIEMENS
| SIMATIC DP, Ethernet/IP head assembly for ET 200S, max. 63 I/O modules incl. motor starter no F modules integrated 2-port switch Consisting of: * Head assembly incl. Termination module, * SD card, * Configuration tool (DVD) | ||
| General information | ||
| Product type designation | Ethernet/IP | |
| Vendor identification (VendorID) | 0008h | |
| Device identifier (DeviceID) | 0239h | |
| Supply voltage | ||
| Mains buffering | ||
| Mains/voltage failure stored energy time | 20 ms | |
| Input current | ||
| from supply voltage 1L+, max. | 250 mA | |
| Power loss | ||
| Power loss, typ. | 2.5 W | |
| Address area | ||
| Addressing volume | ||
| Inputs | 256 byte | |
| Outputs | 256 byte | |
| Interfaces | ||
| Supports protocol for PROFINET IO | ||
| automatic detection of transmission rate | Yes | |
| Transmission rate, max. | 100 Mbit/s | |
| Number of RJ45 ports | 2 | |
| Interrupts/diagnostics/status information | ||
| Diagnostics indication LED | ||
| Monitoring 24 V voltage supply ON (green) | Yes | |
| Connection to network LINK (green) | Yes | |
| Potential separation | ||
| between backplane bus and electronics | No | |
| between supply voltage and electronics | No | |
| between Ethernet and electronics | Yes | |
| Permissible potential difference | ||
| between different circuits | 75 V DC/60 V AC | |
| Isolation | ||
| Isolation tested with | 500 V | |
| Standards, approvals, certificates | ||
| CE mark | Yes | |
| UL approval | Yes | |
| Dimensions | ||
| Width | 60 mm | |
| Height | 119.5 mm | |
| Depth | 75 mm | |
| Weights | ||
| Weight, approx. | 120 g | |
| last modified: | 03/13/2019 | |
